KeLing Purification Technology Company
KeLing Purification Technology Company Limited ------------------------------------------------------------- Advanced. High-Qulity. Reasonable.
Add to Cart
SUS 316 Three Side Blowing Air Shower Tunnel two years warranty
SUS 316 material Introduction
There are two main materials available for indoor and outdoor vertical air shower boxes: coated-power steel and stainless steel.
Usually there are the following collocations:
All power coated steel vertical air shower, the inner floor and nozzle and handle are stainless steel.
The outside is made of power coated steel and the inside is made of stainless steel.
The outside is made of cold plate and the inside is made of stainless steel.
Vertical air shower doors are mainly full glass and translucent window doors optional
(1).power coated steel:
They are more cost-effective than the stainless models. But they can be less durable. The coating is subject to chipping under heavy use. However, as with stainless steel, they are easily wiped clean and require little in the way of other maintenance. Choose all stainless steel vertical air shower when there is acid gas or humid factory environment on site.
(2).Stainless Steel
Its surface is resistant to both rust and stains. It is not coated, so there is nothing to chip. The disadvantage of stainless steel is its price is higher than coated power steel.
201 stainless steel is the most cost-effective stainless steel material, cheap, but easy to rust; 304 stainless steel is the most common and widely used stainless steel material, not easy to rust, good quality, relatively high price; 316 stainless steel is an imported material, used in some high-end equipment, such as aerospace, food machinery and other fields, the price is high.
Features :
1.Three side blowing, can more fully remove fine particles
2.Made of stainless steel 316 material, resistant to wear and corrosion, long service life.
3.Passed CE certification
4.Other types of air showers can also be customized
Parameter:
| KEL-AS2500T-6 Air Shower Tunnel | ||
| MODEL | KEL-AS2500T-6 | |
| External size (mm) (WXDXH) | 2500x6000x2180mm | |
| Work zone (mm) (WXDXH) | 2000x5880x1910mm | |
| Persons per cycle | 5 Pallet goods | |
| Air shower Duration | Factory set at 12 second (adjustable) | |
| Air shower direction | Three side with blowing | |
| Material (Option) | 1: Entirety Sus304. 2: Entirety sus201. 3: External is steel with power coated, Internal is SUS304. 4: External is steel with power coated. Internal is SUS201. 5: color steel panel . (t=50mm) | |
| Control system | 1: microelectrionic control system with LED display for the shower time. 2: The shower time from 0-99second. (Adjustable). 3: Infrared ray inductor for inside personal shower automatic. 4: Human voice prompt system. 5: with CE remark. | |
| The power of Fan | 380V/50HZ/750W (10 set) | |
| Air flow of fan(m3/h) | 1300m3/h | |
| Fan run (r/min) | 2800r/min | |
| Nozzle in stain less steel | 72 pcs | |
| Wind speed(m/s) | 23-29m/s | |
| Noise level(dB) | <62dB | |
| LED Fluorescent Lamp | 20wx6 | |
|
HEPA Filter | Size(mm) | 630X630X69mm |
| Efficiency | 99.99%@0.3um | |
| Air velocity | 1000(m3/h) | |
| Initial resistance(pa) | <220pa | |
|
Pre-filter | Size(mm) | 775x380x17 |
| Efficiency | 75% @ 0.5um | |
| Resistance(pa) | <30 Pa | |
| Electrical | Power supply | 380v/50Hz |
| Net power(kw) | 0.75X10 kw | |
Application
Semiconductor Industry: Cleanroom air showers are essential in the semiconductor industry, where even the tiniest particles can cause defects in electronic components. The air showers help to remove particles from personnel and equipment before they enter the cleanroom, ensuring a clean and contamination-free environment for manufacturing and testing.
Automotive Industry: In the automotive industry, cleanliness is essential to prevent defects in complex mechanical systems. Cleanroom air showers are used to remove contaminants from personnel and equipment before they enter the cleanroom, helping to ensure the highest level of quality in automotive manufacturing.
Aerospace Industry: The aerospace industry requires an extremely clean environment to ensure the safety and reliability of spacecraft and aircraft components. Cleanroom air showers are used to remove particles and other contaminants from personnel and equipment before they enter the cleanroom, helping to ensure a safe and reliable environment for manufacturing and testing.
Medical Device Industry: Cleanroom air showers are widely used in the medical device industry to maintain a sterile environment for the manufacturing of medical devices. The air showers help to reduce the risk of contamination from particles and other contaminants, ensuring the highest level of safety and efficacy for medical devices.
Biotechnology Industry: In the biotechnology industry, cleanliness is critical to prevent contamination and ensure the safety of biotech products. Cleanroom air showers are used to remove dust, particles, and other contaminants from personnel and equipment, reducing the risk of contamination and ensuring the highest level of biotech product safety.
Optics Industry: The optics industry requires an extremely clean environment to ensure the highest level of precision in the manufacturing and testing of optical components. Cleanroom air showers are used to remove particles and other contaminants from personnel and equipment before they enter the cleanroom, helping to ensure the highest level of precision in optical manufacturing and testing.
Packing:
