
Add to Cart
The Cleanroom Shoe Cleaning Machine is a necessary piece of equipment to maintain high standards of cleanliness in industries where sterility is essential. By incorporating this machine into a cleanroom environment, companies can ensure that their employees' footwear does not introduce any contamination. With proper usage methods, maintenance, and filter replacement, this machine will continue to provide an essential function in cleanroom environments for many years.
Product Value
1.Solve and improve the cleanliness of clean rooms and office areas in the clean room from the source;
2. The machine is fully automatic and intelligent, saving manpower;
3. Cancel the use of sticky mats and shoe covers, and be an environmentally friendly green enterprise, saving business-related costs.
Features
1. The whole machine is highly automated, with photosensitive sensor control, and automatically stops after cleaning;
2. Short cleaning time and high efficiency, only 3 seconds;
3. The amount of consumables is small, the cost of use is low, and only clean tap water is needed on weekdays;
4.Fully automatic model, only need to directly access the tap water pipe, the drain end is connected to the water passage, recycling, automatic timed drainage, and more cost-saving;
5.Cleaner cleaning belt is durable and has a long service life
6.Safe use of the machine, water and electricity separation does not leak, water level alarm, you can also choose to install handrails, guide channels, safer.
Device Parameters
Dimensions: 3000*684*130 mm
Cleaning size: 1825*510 mm
Drying size: 860*560 mm
Absorbent pad material: PVA/ PU sponge
Inlet water temperature: 0-40 ℃
Water tank capacity: 45L
Drainage method: automatic / manual
Motor Power: 200W
Pump power: 45W
Pump voltage: 24V
Working current: 1.5A
Safety protection: overload / leakage protection
Motion noise : <62 dB
Body material: SUS304
Maximum load: 400 kg
Equipment weight: 170KG
Service life: 8 years
Product Maintenance
Name | Service life | Maintenance cycle |
Filter | 5 years | Open the front cover of the device and take out the filter cleaning. It is recommended to clean it at least once a day. |
brush | 6-12 months | Clean up foreign objects on the brush once a day |
Absorbent pad | 6 months | Clean the absorbent pad once a day |
Sprocket | 24 months | Open the sprocket cover and apply grease. It is recommended once a month. |
At Last
Our products have good reputation in worldwide,the client spread all over European America and Southeast Asia.
Sincerely establish steady business relationship with you!